Professional Sound Corporation M 8 Spezifikationen

M3 Portable Audio Mixer Operation Manual for Mixers with PCB V1.2 Copyright 2002 Professional Sound Corporation Printed in the U.

10can monitor levels from the mixer only. We have chosen 440Hz simply because it is much more pleasant in your headphones than the typical 1Khz used

11More complete descriptions of the M-S and X-Y stereo recording techniques can be found in the literature of the major microphone manufacturers such

12powder coat paint is then baked on in an oven. Powder coating chosen for its durability and environmental friendly characteristics. All silk-sc

13 The outputs of the “Camera A” multi-pin are electrically the same as the XLR outputs on the right side of the mixer. Thus, the output levels can

14WARRANTY AND NON-WARRANTY SERVICE In the unlikely event your M3 Mixer requires service it should be carefully packed and shipped prepaid to: Prof

15SPECIFICATIONS Size: 8.600” x 6.825” x 2.000” (21.8cm x 17.3cm x 5cm) Weight: 3.5Lbs. (1.6Kg) Temp Range: -4 to +158F (-20 to +70C) Bat

2TABLE OF CONTENTS DESCRIPTION……………………………………………………………………………4 SAFETY WARNINGS……………………………………………………………………4 APPLICATIONS………………………………………………………………………….

3B. NIGHT (BACKLIGHT) USE ADDITIONAL FEATURES…………………………………………………………10 A. SLATE MICROPHONE B. REFERENCE OSCILATOR C. BATTERY TEST D. M-S AND X

4DESCRIPTION Thank you for purchasing the Professional Sound Corporation M3 Portable Audio Mixer. PSC is confident that this new M3 Mixer has set n

5 INPUTS: A. BALANCED INPUTS The PSC M3 Audio Mixer provides three input channels utilizing female XLR connectors. The studio grade input circuit

6 In the 12T powering position, the mixers provides 12 volts DC to pin 2 of the XLR input. Pin 3 is referenced to ground and pin 1 is shield to grou

7always turn down the channel fader before removing the remote control! High audio levels may occur if the channel fader is in the maximum or near m

8The M3 contains two separate limiters that are controlled by one front panel mounted switch. This switch has three settings: Off, Separate (S), and

9levels are adjusted using a small jewelers screwdriver (or “Greenie” screwdriver). The adjustment points are located on the bottom panel of the mix